Owx Mobile W7 Official Firmware

FIRMWARE: Owx Mobile W7 SC7731c 6.0.zip

FLASH TOOLS: SPD Download Tool

DRIVER: Spreadtrum Drivers.

Setp 1. Install Spreadtrum Drivers.

Step 2. Install SPD Download Tool.

Step 3. Open the Research download tool > bin folder.

Step 4. Launch ResearchDownload.exe.

Step 5. Click on the Load Packet icon (top left corner).

Step 6. In the window that pops up, navigate to the location of the .pac file, select it then click Open.

Step 7. The PAC file should now be loaded (its name should appear at the top).

Step 8. Click the Settings Icon (top left corner).

Step 9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files. Step 8. Click the Start downloading button.

Step 10. You should see Waiting…. under the Progress bar.

Step 11. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.

Step 12. Once flashing is complete, you’ll see Passed.

Step 13. Click on the Stop downloading icon then disconnect the phone from PC and boot.