Breaking News

Geant G3 Firmware



LOGO

Waiting for USB Port...
  Set MediaTek PreLoader USB VCOM (Android) (COM8)
  Please Hold "ON" to connect with the phone...
  Connected to Phone.
  CPU: MT6572 SW:0000 Ver: CA01
  Downloading Boot8 ...
  EMMC Size: 0x00E9000000
  Flash Type: EMMC
  INT/EXT RAM  Size: 0x0+0x0
  Reading infr(EMMC)...
  id:WG3512W22 GEANT 20160810-160242
  version:4.4.2
  model:GEANT G3
  brand:GEANT
  manufacturer:GFIVE1
  PRELOADER  BaseAddr:0x0  Size:0x1400000
  MBR  BaseAddr:0x1400000  Size:0x80000
  EBR1  BaseAddr:0x1480000  Size:0x80000
  PRO_INFO  BaseAddr:0x1500000  Size:0x300000
  NVRAM  BaseAddr:0x1800000  Size:0x500000
  PROTECT_F  BaseAddr:0x1D00000  Size:0xA00000
  PROTECT_S  BaseAddr:0x2700000  Size:0xA00000
  SECCFG  BaseAddr:0x3100000  Size:0x20000
  UBOOT  BaseAddr:0x3120000  Size:0x60000
  BOOTIMG  BaseAddr:0x3180000  Size:0x600000
  RECOVERY  BaseAddr:0x3780000  Size:0x600000
  SEC_RO  BaseAddr:0x3D80000  Size:0x40000
  MISC  BaseAddr:0x3DC0000  Size:0x80000
  LOGO  BaseAddr:0x3E40000  Size:0x300000
  EXPDB  BaseAddr:0x4140000  Size:0xA00000
  ANDROID  BaseAddr:0x4B40000  Size:0x44C00000
  CACHE  BaseAddr:0x49740000  Size:0x14600000
  USRDATA  BaseAddr:0x5DD40000  Size:0x52C00000
  FAT  BaseAddr:0xB0940000  Size:0x37DC0000
  BMTPOOL  BaseAddr:0xFFFF0000  Size:0x1500000
  BaseAddr:0x0  Size:0x0
  Done.
سجِــــل العملية: NCK
كود:
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM8)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6572_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447326111 
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 90014A48344732 : 000000000000000000
 EMMC UA SIZE: 0xe9000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : MediaTek DA USB VCOM (Android) (COM7)
 Detected partitions count: 20
 Start dumping flash, this can take up to 1 hour.......
 Start procesing PRELOADER ......
 Start procesing MBR ......
 Reading:  BEGIN: 0x1400000        - LEN: 0x200           
 Start procesing EBR1 ......
 Reading:  BEGIN: 0x1480000        - LEN: 0x200           
 Start procesing PRO_INFO ......
 Reading:  BEGIN: 0x1500000        - LEN: 0x300000        
 Start procesing NVRAM ......
 Reading:  BEGIN: 0x1800000        - LEN: 0x500000        
 Start procesing PROTECT_F ......
 Reading:  BEGIN: 0x1d00000        - LEN: 0xa00000        
 Start procesing PROTECT_S ......
 Reading:  BEGIN: 0x2700000        - LEN: 0xa00000        
 Start procesing UBOOT ......
 Start procesing BOOTIMG ......
 Reading:  BEGIN: 0x3180000        - LEN: 0x600000        
 Start procesing RECOVERY ......
 Reading:  BEGIN: 0x3780000        - LEN: 0x600000        
 Start procesing SEC_RO ......
 Reading:  BEGIN: 0x3d80000        - LEN: 0x40000         
 Start procesing LOGO ......
 Start procesing ANDROID ......
 Reading:  BEGIN: 0x4b40000        - LEN: 0x44c00000      
 Backup CACHE disabled, we will skip it....
 Backup USRDATA disabled, we will skip it....
 Backup FAT disabled, we will skip it....
 Saved to : C:\Users\Mr_SaMir\Documents\Android_MTK\firmware_backup\0-By CPU_MT6572_EMMC_01_05_2017_11_30_48
 Wait untill phone will start charging.
 All done.

FIRMWARE



No comments